在线咨询
扫一扫

官方微信二维码
扫描加关注

全国免费服务热线
18560211715

返回顶部
新闻动态主页 > 新闻动态

消除玻镁防火板材表面气泡的方法

(1)在成型机上加振动措施,用振动来消除胶结料中的气孔,这是很传统、很古老、而又很有效的办法。这几年在板材生产实践中也证实了这一点。
(1) vibration measures in the molding machine, vibration to eliminate pores in the binder, which is very traditional, very old, very effective way and. In the past few years production practice also confirmed this point.
(2)在机器上实施滚压措施,即在底托板和布的上面加一个可调节高度的滚压杆。滚压杆不可太粗要埋入料浆中,随着滚压杆的转动将附在板坯 表在贩上气孔及气泡挤压出来。
(2) the implementation of measures in the rolling machine, which is above the bottom plate and cloth with a height adjustable rolling rod. The rolling rod is not too thick to be buried in the slurry with the rotating rolling rod will be attached to the table in the stall on slab holes and squeeze out bubbles.
澳门新莆京娱乐网站
(3)选用合理的料浆配方,用消泡剂消除料浆中的气泡,控制好料浆的流动性,单这一项措施也可以解决上述弊病。中国菱镁行业同山东科研基地的复合改性剂C3是一种综合的理想改性剂兼有很强的消泡作用
(3) use reasonable slurry formulation, defoaming agent to eliminate bubbles in the slurry, well slurry flow control, single this measures can also solve the ills. China Magnesite Industry with Shandong research base compound modifier C3 is a kind of comprehensive ideal modifier has strong defoaming effect
本文来自:www.4546.com更多的精彩内容点击:/我们将会一一为您解答。
This article from: Formica HPL more exciting content, click: / we will one by one to answer your questions.

<<
Baidu
sogou
>>