在线咨询
扫一扫

官方微信二维码
扫描加关注

全国免费服务热线
18560211715

返回顶部
新闻动态主页 > 新闻动态

防火板的接口的处理方法

对于防火装饰板而言
The decorative board for
防火板的厚度最多不超过1.5毫米,(贴板)要想把相互接触的两块都做成45度角之后再粘在一起是很难的,因为防火板太薄了。很那处理成绝对的45度角的,一般的都会有细微黑边,我认为是没有什么好的办法的,除非用封边条,不过有许多人认为用封边条太难看了。有兴趣的朋友,不妨用和防火板同样的油漆,涂料,或石膏或能调颜色的腻子粉修补一下试试。
Fire board thickness of not more than 1.5 mm (plate) to make contact with each other after two blocks are made of 45 degrees and then stick together is very difficult, because the fire board is too thin. Is the processing into the absolute angle of 45 degrees, the general will have subtle black side, I think is no good way, unless with edge banding, but many people think that the edge banding too ugly. Interested friends, may wish to use and fire in the same paint, paint, or gypsum or color tune repair putty powder to try.
澳门新莆京娱乐网站
对于防火板墙体而言
For fireproof board wall
是这样:首先要看你做的防火板是做墙体、吊顶还是包钢柱管道之类。另外要看建筑设计要求的耐火极限。越高(最高4小时)做法越麻烦。防火板的意义在于被动防火,其耐火极限是整体做测试得出的检测报告。所以真正防火的不单单靠的是板材,而是龙骨,板材,岩棉、自攻钉等等组成的整体防火。
Is this: first of all to see you do is fire board wall, ceiling or steel pipe column like. In addition to the requirements of building fire resistance design. The higher (maximum 4 hours) is more trouble. The significance of fire prevention board is passive fire protection, the fire resistance limit is the overall test report. So the real fire prevention not only rely on is the plate but keel plate, rockwool, self tapping screws and so on composition of the overall fire.
本文由澳门新莆京娱乐网站提供帮助,更多的相关内容请点击:/我们将详情为您解答.欢迎您的光临!
This paper by Formica help, more relevant content, please click: / us the details for you to answer. Welcome your presence!

<<
Baidu
sogou
>>